12V 100A Smart Battery Isolator Lithium Load Disconnect

SKU
SBI12-LLD
Special Price NZ$219.42 Regular Price NZ$243.80
In stock
Product details
The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed specifically for use in LiFePO4 battery applications as a system to protect the lithium battery from being excessively discharged by auxiliary loads.
OVERVIEW

The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO4) as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.

Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads.

Spike protection

The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.

Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected 

Quality fuse kits 

Installation of REDARC smart battery isolators should also see the use of quality fuse kits.

To view product flyer, click here.

Specifications
More Information
gtin_barcode 9338628005598
brand REDARC
Max. Inrush Current 400A
Max. Continous Current 100A
Turn On Voltage 11V
Turn Off Voltage 10.5V
Turn On Delay 10 seconds
Turn Off Delay 2 seconds
Standby Current <5mA
Operating Current <0.1A
Weight 7 oz (200 g)
height 2.48" (70 mm)
width 2.95" (75 mm)
depth | length 3.15" (80 mm)
Warranty 2 Years
System Voltage 12V
Output Voltage 12V DC
Input Fuse Rating 100A
Output Fuse Rating 100A
SHIPPING & RETURNS
Shipping

REDARC offers customers free freight within Australia on products purchased via the REDARC website, unless a dangerous goods charge is deemed necessary in order to ship products of a lithium chemistry.All products have a 5 day lead time before shipment after which it will be shipped via your preferred shipping method. For alternative freight options please contact REDARC at power@redarc.com.au

For international orders, freight will be calculated at time of checkout. Orders will be shipped from our factory in Lonsdale with delivery timeframes dependant on location.

Where orders are shipped to a delivery address outside Australia, you are responsible for the compliance terms as written in our Website Terms of Use

Returns

The terms and conditions relating to 'Return of goods' set out in our Trading Terms will apply to all good purchased by You via the Site. All goods purchased by You via the Site also come with a manufacturer's warranty found here.

REVIEWS

RELATED PRODUCTS

HAVE A QUESTION?

Need a little help with choosing the right product? We're here to help! You can use our handy vehicle look-up tool, find a local installer or stockist in your area or check out our FAQs.

Still not sure? Don't stress, you can contact our helpful Tech Support Team by phone or email too.