+61 8 8322 4848
The REDARC Smart Start® SBI24 is a dual battery isolator used to isolate the start and auxiliary batteries in a dual battery system. It’s a microprocessor-controlled smart battery isolator and will protect the primary battery from a low charge in the secondary battery so it won’t drain the primary battery, while allowing the auxiliary battery to supply non-essential loads. The SBI24 provides 24 volt DC incorporating 100A of continuous ratings.
The Smart Start SBI24 battery isolator is mostly used in commercial vehicle dual battery systems, it incorporates electronic components preventing the solenoid from generating high voltage transients. It’s used instead of a diode battery isolator due to the voltage drop associated with diode type isolation. It features sophisticated fault detection and LED indication of operation to warn the user of faults including over-voltage, voltage drop and excessive current draw conditions.
The Smart Start SBI24 battery isolator is a safe way to charge a dual battery system and should often be installed with a high quality fuse kit.
To view product flyer, click here.
Not sure what dual battery system is best for your vehicle? Let Shaun Whale explain more.
For reviews on the Smart Start Battery Isolator, watch the below
What is a smart battery isolator and why would you need it?
Come behind the scenes at REDARC as Shaun Whale teaches you how to choose the best dual battery setup for your 4WD.
Explaining offroad battery chargers - with Patriot Campers
Review by Pat Calinan from 4x4 Adventure
REDARC Smart Start Dual Battery Isolator Features with Carlisle Rogers 4WD Touring Australia
The difference between a REDARC SBI & BCDC with 4WD NZ
See the correct way to mount a Smart Battery Isolator
See a basic Smart Battery Isolator install